|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FSUSB45 -- Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect July 2008 FSUSB45 -- Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect Features Low On Capacitance: 7.0pF Typical Low On Resistance: 3.9 Typical Low Power Consumption: 1A Maximum Description The FSUSB45 is a bi-directional, low-power, two-port, Hi-Speed, USB2.0 switch. Configured as a double-pole, double-throw (DPDT) switch, it is optimized for switching between two Hi-Speed (480Mbps) sources or a Hi-Speed source and a Full-Speed (12Mbps) source. The FSUSB45 is compatible with the requirements of USB2.0 and features an extremely low on capacitance (CON) of 7.0pF. The wide bandwidth of this device (720MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk also minimizes interference. The FSUSB45 contains special circuitry on the switch I/O pins for applications where the VCC supply is powered-off (VCC=0), which allows the device to withstand an over-voltage condition. This device is designed to minimize current consumption even when the control voltage applied to the SEL pin is lower than the supply voltage (VCC). This feature is especially valuable to mobile applications, such as cell phones, allowing for direct interface with the general-purpose I/Os of the baseband processor. An additional feature is the detection of the 1,1 state on D+/D- to signal an interrupt (INT) to the processor when entering a dedicated charging port mode of operation. - 15A Maximum ICCT over an Expanded Voltage Range (VIN=1.8V, VCC=4.3V) Wide -3db Bandwidth: > 720MHz Packaged in: - 10-Lead MicroPakTM (1.6 x 2.1mm) - 10-Lead UMLP (1.4 x 1.8mm) 8kV ESD Rating, >16kV Power/GND ESD Rating Power-Off Protection on All Ports When VCC=0V - D+/D- Pins Tolerate up to 5.25V Applications Cell Phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-top Box IMPORTANT NOTE: For additional performance information, please contact analogswitch@fairchildsemi.com. Figure 1. Analog Symbol Ordering Information Part Number FSUSB45L10X FSUSB45UMX Top Mark JA JB Operating Temperature Range -40 to +85C -40 to +85C Eco Status RoHS Green Package 10-Lead MicroPakTM 1.6 x 2.1mm, JEDEC MO-255B 10-Lead, Quad, Ultrathin Molded Leadless Package (UMLP), 1.4 x 1.8mm MicroPakTM is a trademark of Fairchild Semiconductor Corporation. For Fairchild's definition of "green" Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. (c) 2007 Fairchild Semiconductor Corporation FSUSB45 * Rev. 1.0.5 www.fairchildsemi.com CONFIDENTIAL & PROPRIETARY -- DO NOT DISTRIBUTE FSUSB45 -- Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect (c) 2007 Fairchild Semiconductor Corporation FSUSB45 * Rev. 1.0.5 www.fairchildsemi.com 10 |
Price & Availability of FSUSB45L10X |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |